Follow the line well and trace it with the hot glue to make sure it is fit for your placement.
To hold the lens and the box together, you may use the hot glue gum or place dust tape at the edges of the lens together. Make sure the side that you see through in the lens is placed inside partially. Place your magnifying lens in a place where you have removed the box you traced. If you are kids make sure you have a grown up with you while making the projector. Be careful while cutting the traced circle of the box not to damage the table with your knife or not to injure your hand. Make sure you follow the traced line well until it is completely removed from the box. After tracing the magnifying lens by making a circle on it, use a sharp object to cut through the traced circle well and precise. Then place the magnifying lens on the other side at the top and trace using a pensile. With your magnifying lens, on the one hand, place the box vertically on the table with one small side we placed on the table. Position the magnifying lens well in the shoebox.In case the box is loose on the sides, stick it together using glue and hold it until they are stuck together really well. Make sure that the box is fitting match to the device you are going to use as the tablet, smartphones and others. Get a shoebox in your home that you are not using any size that is sturdy. Make sure your shoebox is well glued on the sides.
DIY PROJECTOR MOVIE
If you are getting a lens from your home make sure it is one that you will not need to do something else with it as it will not be good to remove from the movie projector and in another object it may not work well again on the other object.
Place the lens at the edge of the table and cut off the handle using a hacksaw.Īlso if you have other available unused lenses at home, you may prefer to use them instead of too much work. You should get a magnifying glass from the office if you have one or buy at any store that has them. Shape the magnifying lens by cutting off the handle.
0 kommentar(er)
